1. Surface Preparation

1. • Remove debris and lightly clean the tile surface. Avoid acid cleaners; if used, rinse thoroughly with water.
   • Ensure the substrate temperature is between 16°C (60°F) and 32°C (90°F).

2. Mixing

1. • Empty Part A (Resin) and Part B (Hardener) into a clean mixing pail.
   • Mix with a margin trowel or slow-speed drill mixer until thoroughly blended.
   • Pour the mixture immediately onto the working area using a plastic sheet as a drop cloth.

3. Application

1. • Apply grout using standard epoxy grouting techniques, filling joints uniformly.

4. Cleaning

1. • Initial Cleaning (30–45 minutes post-application): Clean tiles with water and the provided sponge, then wipe with a clean towel.
   • Final Cleaning (Within 24 hours): Use mild soap detergent to remove any haze.

5. Precautions

1. • Avoid contact with eyes. Seek medical attention if swallowed.
   • Keep away from children.

6. Disposal

1. • Do not reuse containers. Dispose of according to local regulations.

7. Technical Support

On-site support is available from Conpac Technical Services for correct product usage.