PACKAGING:10kg
Colour :Off-White
High Bond Strength
Fast Setting
Easy to Use
Chemical resistant
Single component
COVERAGE
Approx. 27 – 29 Sqft per 10kg unit at 3mm thickness
Coverage will vary depending on trowel notch size, type and size of tile and substrate evenness and plumb
Shelf Life
Factory sealed containers of this product are
guaranteed to be of first quality for one (1) year
PACKAGING:10kg
Colour :Off-White
MIXING
DWTA 515 Modified PU Adhesive is a single component, ready to use adhesive. Open the lid of the pail, mix with a scoop or trowel and apply with the proper sized notched trowel. Take out only the amount of adhesive required for use and keep the lid of the pail closed to prevent skinning of the adhesive in the pail.
APPLICATION
For commercial and residential installations of Glass Mosaic Tiles, ceramic tile, vitrified tile and natural stone over most drywall boards and clean cement based surfaces. Used where installations must resist physical abuse, shock, and mild chemicals. (Interior & Exterior)
Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to insure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large tiles (> 12 x12 ) to provide full bedding and firm support. Place tiles into wet, sticky adhesive and beat in using a beating block and rubber mallet to imbed tile and adjust level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of tile_ If adhesive is skinned over (not sticky), remove and replace with fresh adhesive
Conpac mix Pvt Ltd. is a company founded by a group of professionals from the relevant industries with rich experience and international exposure.
53/2288/b, 96 Terrace, Ground Floor, Ponnurunni, Vyttila, Ernakulam, Kerala – 682019
