1. Surface Preparation

• Remove debris and clean tile surfaces.
• Avoid acid-based cleaners; if used, rinse thoroughly with water.
• Ensure substrate temperature is between 16°C (60°F) and 32°C (90°F).

2. Mixing

•  Part A (Base) and Part B (Hardener) into a clean mixing pail.
• Blend thoroughly using a margin trowel or slow-speed drill mixer.
• Gradually add Part C (Coloured Filler) and mix for 2–3 minutes until a uniform consistency is achieved.

3. Application

• Use standard epoxy grouting techniques to apply grout, ensuring joints are filled uniformly.

4. Cleaning

• Initial Cleaning (30–45 minutes post-application): Clean tiles with water and a provided sponge, then wipe dry with a clean towel.
• Final Cleaning (within 24 hours): Use a mild soap detergent to remove any haze.

5. Precautions

• Avoid eye contact. Seek medical attention if swallowed.
• Keep out of reach of children.

6. Disposal

• Do not reuse containers. Dispose of them responsibly, following local regulations.

7. Technical Support

• On-site assistance is available through Conpac Technical Services for proper product application and usage guidance.