CP ReCon PH

CP ReCon PH is a high-performance, single-component, polymer-modified, cementitious pinhole filler and fairing coat re-profiler. It is specially formulated to address surface imperfections in concrete and plaster substrates. This versatile product offers excellent adhesion, a smooth finish, and durable performance, making it ideal for repair and re- profiling tasks.

Enquire Now

Conpacmix / Construction Chemicals / CP ReCon PH

CP ReCon PH

Explore

Features & Benefits

Superior Adhesion: Adheres strongly to concrete, plaster, and masonry surfaces.
Easy to Apply: Can be applied with a trowel or putty knife for precise and efficient repairs.
Highly Durable: Resistant to cracking and shrinkage, ensuring long-lasting repairs.
Smooth Finish: Delivers an aesthetic surface ready for coatings or further finishing.
Non-Toxic: Suitable for both indoor and outdoor use.

Product Details

Technical Data

Yield: 16.2 liters per 25 kg bag
Coverage: 16.2 m² per 25 kg bag at 1 mm thickness
Mixing Ratio: Approximately 5.5 to 6 liters of clean water per 25 kg bag
Setting Time: Initial set in 45 minutes; final set in 2 hours (depending on ambient conditions)

How to Apply

Surface Preparation:

Ensure the substrate is clean, sound, and free of oil, grease, or loose material.
Pre-wet the surface to achieve a Saturated Surface Dry (SSD) condition.
Remove laitance or contaminants using appropriate mechanical means if required.

Mixing Instructions:

Gradually add CP ReCon PH to clean, potable water in a clean mixing container.
Mix using a low-speed drill and paddle for 2–3 minutes until a smooth, lump-free consistency is achieved.
Adjust water content slightly for the desired consistency, ensuring not to exceed the recommended mixing ratio.

Application Process:

Use a steel trowel or putty knife to apply the material onto the prepared surface.
For best results, work the material into the imperfections and smooth out the surface.
For thicker applications, apply multiple coats, ensuring the previous coat is partially cured.

Packaging:

10 kg bags
25 kg bags

Storage and Shelf Life:

Store in a cool, dry place, away from direct sunlight and moisture.
Shelf life is 12 months in unopened packaging when stored under recommended conditions.

Need Assistance?
Our technical team is always ready to assist you with any guidance or support you need. Please feel free to reach out for any assistance or queries related to our products or applications. We’re here to help!

Areas of Application

Precast Concrete Elements: Fixes small defects, pinholes, and blemishes.
Fair-faced Concrete: Enhances the appearance of exposed concrete structures.
Columns and Beams: Repairs surface irregularities in structural elements.
Cracks in Plaster: Fills and smoothens minor cracks and imperfections.