CP-MoyaShield WR

CP-MoyaShield WR is a clear, silane-siloxane-based water repellent sealer designed to penetrate deeply into the substrate, providing long-lasting water repellency by chemically reacting with the surface. Its micro-molecular structure ensures deep penetration, preventing water ingress and enhancing the durability of treated surfaces.

Enquire Now

Conpacmix / Waterproofing / CP-MoyaShield WR

CP-MoyaShield WR

Explore

Features & Benefits

Deep Penetrating Sealer: Effectively penetrates substrates for long-lasting protection.
Water and Chloride Resistance: Reduces water and chloride intrusion to protect against damage.
Non-Staining: Does not alter the natural appearance of the substrate.
Ready to Use: Easy to apply without additional preparation.
Chemical Resistance: Resistant to fuels, oils, and atmospheric contaminants.
Breathable: Allows moisture vapor to escape while preventing water absorption.
Efflorescence Prevention: Inhibits the formation of surface deposits.
UV Resistant: Maintains performance under prolonged sun exposure.
Eco-Friendly: Non-toxic, with no fire hazard during application.
Long-Term Effectiveness: Ensures durable water repellency.

Product Details

Pack Size

20 liters
200 liters

Coverage

Approximately 5 m²/liter/coat. Actual coverage depends on the porosity and texture of the substrate.

Technical Data

Property	Value
Component	Single
Form	Liquid
Colour	Clear
Depth of Penetration	> 3 mm
Drying Time	> 3 minutes
Recoat Time	Immediately (wet on wet)
Application Temperature	+5°C to +40°C

How to Apply

Surface Preparation

Ensure the surface is clean, dry, and free from dust, loose material, and dampness.
Remove contaminants like oil, grease, or dirt for adequate penetration.
Surfaces cleaned with water must be completely dry before application.
Repair any cracks or damage using the CP-ReCon range of repair products.

Application Process

Method: Apply CP-MoyaShield WR using a sprayer or brush.
Direction: Start at the top and work downward, keeping a wet edge at all times.
Edges: Work well into edges and corners for complete coverage.
Excess Material: Use a soft, dry cloth to remove any excess product.
Recoat: Apply the second coat immediately (wet on wet).
Curing: Allow the surface to dry for at least 24 hours before use.

Precautions