CP Decorative Plaster - Glitterlite

CP Decorative Plaster – Glitterlite

Glitterlite is a dry pre-mixed decorative finish designed for both internal and external use, offering a stunning sparkling effect. The sparkle is achieved through the incorporation of glass, silica sand, and marble chips, which remain exposed on the surface after application. This product is ideal for creating an impressive appearance with high weather resistance, available in various colours and three exciting textures: glass, silica, and a combination of both.

Enquire Now

Conpacmix / Premix Plaster / Decorative Plasters / CP Decorative Plaster – Glitterlite

CP Decorative Plaster – Glitterlite

Explore

Features & Benefits

Ultimate Sparkling Finish: Provides a visually striking sparkling effect, enhancing the aesthetic appeal of surfaces.
Durable and Weather-Resistant: Suitable for both indoor and outdoor applications, offering lasting protection and beauty.
Customizable Textures: Available in three exciting textures — glass, silica, and a blend of both — for versatile design possibilities.
Exposed Aggregate: The glass and aggregate chips are exposed on the surface, giving the plaster a distinctive, elegant finish.

Product Details

Technical Data

Composition: White Portland Cement
Packaging: 25 kg/bag
Pot Life: Approximately 40 minutes
Coverage: 2.2 m² at 5mm thickness per bag
Curing Requirements: Minimum 48 hours

Water: Use potable water for mixing.

How to Apply

Surface Preparation:
Ensure the surface is clean, dry, and free from dust, grease, and loose material.
Mixing:
Mix Glitterlite with potable water to form a smooth, lump-free consistency.
Application:
Apply a thin coat of Glitterlite to an approximate thickness of 5mm onto the prepared surface using a steel trowel.
Work from a wet unset edge to complete the area in one continuous operation. Level off with an aluminum straight edge, and smooth with a steel trowel.
As the Glitterlite begins to stiffen, slightly dampen the surface, then close it with a flat steel trowel.
Once firm (when finger pressure does not make an indentation), use a felt roller dipped in potable water to carefully work the surface in an all-over direction, revealing the glass or aggregate chips.
Final Touch:
To achieve an extreme sparkling effect, wash the surface with diluted hydrochloric acid after 24 hours to remove any remaining fine cement film from the glass chips.

Areas of Application

Ideal for creating sparkling decorative finishes on both interior and exterior surfaces.
Perfect for residential, commercial, and industrial projects.
Suitable for a variety of prepared backgrounds, including concrete, plaster, and masonry.