Substrate Requirements

The surface must be sound, clean, and free from dirt, grease, oil, or loose plaster. Ensure proper curing of plaster or leveling mortar for at least 7 days.

Surface Preparation

1. Clean the Substrate: Remove all impurities, including dust, debris, or curing agents.
2. Dampen the Wall: Wet the surface before adhesive application.
3. Tile Preparation: Clean the back of the tile for dust or coatings.

Mixing Instructions

• Use clean water and a slow-speed electric drill mixer (≤ 300 rpm).
• Add CP C500 Grey Mortar to water and mix until creamy.
• Mixing Ratio: 1 bag (20 kg) with 5-6 liters of water*.

Installation Guidelines

1. Prepare the Surface: Wet the surface and remove excess water.
2. Apply the Adhesive:
   • Use the flat side of a trowel to spread adhesive for even coverage.
   • Apply additional adhesive with a notched trowel.
3. For Large Tiles:
   • Back butter tiles with adhesive for proper thickness.
   • Ensure 100% coverage for durability.
4. Tile Sizing Recommendations:
   • Thin Tiles (300x300mm): 6mm x 6mm trowel, 3mm thickness.
   • Porcelain Tiles (450x450mm): 6mm x 6mm trowel with back buttering, 4-5 mm total thickness.
   • Large Porcelain Tiles (600x600mm): 6mm x 9mm trowel with back buttering, 6mm total thickness.

Cleaning

Remove excess adhesive from the tile surface with a damp sponge or cloth while the mortar is fresh.