Substrate Requirements

Ensure the surface is:

1. Clean and Sound: Free of dust, grease, oil, or loose plaster.
2. Properly Cured: Allow at least 7 days for curing of newly applied plaster or mortar.

Surface Preparation

1. Clean the Substrate: Eliminate dust, debris, and curing agents.
2. Dampen the Area: Lightly wet the surface without leaving standing water.
3. Tile Preparation: Clean the backs of tiles to remove dust and coatings.

Mixing Instructions

1. Use clean water and a slow-speed electric drill mixer (≤ 300 rpm).
2. Mix 20 kg of C800 Grey Mortar with 4.8–5.6 liters of water.
3. Stir thoroughly to achieve a smooth, lump-free, creamy consistency.

Installation Guidelines

1. Surface Preparation: Ensure the substrate is damp and contamination-free.
2. Adhesive Application:
   • Spread the adhesive evenly using the flat side of a trowel.
   • Use a notched trowel to create grooves for enhanced bonding.
3. Recommended Applications:
   • Interior and exterior tiling projects.
   • Swimming pools and other wet areas.
   • Large tiles and heavy stones for walls and floors.

Cleaning

• Use a damp sponge or cloth to clean excess adhesive while it is still fresh.